EGK SINGLE LENGTH IRON HEADS ONLY, 4,5,6,7,8,9,PW,AW,SW, HEADS ONLY, RIGHTHAND

Description

COMPONENT IRON HEADS FOR GOLFERS WHO ASSEMBLE THEIR OWN CLUBS.
THESE HEADS ARE DESIGNED FOR MAKING SINGLE LENGTH GOLF CLUBS. THEY ARE WEIGHTED AND THE LIE ANGLE IS SET TO BE COMPLETED WITH YOUR SHAFTS AT SEVEN IRON LENGTH.
WHITE PAINT FILL IN BOTTOM GROOVE IS A GREAT ALIGNMENT AID!
4 AND 5 IRON HEADS ARE HOLLOW (HYBRID) CONSTRUCTION.
5 THROUGH SAND WEDGE ARE CAVITY BACK WITH DEEP UNDERCUT.
THE PICTURES WITH TWO HEADS SHOW BOTH CONSTRUCTIONS.
SPECIFICATIONS:
HEAD         LOFT       LIE       WEIGHT       BOUNCE      OFFSET
4                    24           63          271                 3                  3.15
5                    28           63          271                 3                  3.15
6                    32           63          271                 3                  3.15
7                    36           63          271                 3                  3.15
8                    40           63          271                 3                  3.15
9                    44           63          271                 3                  3.15
PW                48           63          271                 3                  3.15
AW                52           63          271                 3                  3.15
SW                56           63          271                12                 3.15
MANUFACTURING TOLERANCES (THESE ARE STANDARD IN THE INDUSTRY, ALTHOUGH NOT OFTEN PUBLISHED}
LOFT AND LIE +/- ONE DEGREE;  WEIGHT +/- 3 GRAMS.
.370 HOSEL SIZE (STANDARD SIZE FOR CLUBMAKER IRONS, FACTORY MADE IRONS OFTEN USE .355 TAPERED HOSELS SINCE EACH MODEL WILL BE MADE AT A DIFFERENT ASSEMBLY STATION, SO PRE-MADE BOXES OF PROPER LENGTH SHAFTS WILL BE DELIVERED TO THAT STATION, ELIMINATES MISTAKES BY UNSKILLED ASSEMBLERS)
TIP TRIM THE SHAFT YOU WISH TO USE, TO THE SEVEN IRON TRIM SPECIFIED BY THE SHAFT MANUFACTURER. DO THIS SAME TRIM FOR ALL OF THESE HEADS, SINCE THEY ARE ALL THE SAME WEIGHT. ASSEMBLE AND THEN BUTT TRIM TO THE LENGTH YOU DESIRE, INDUSTRY STANDARD LENGTH FOR STEEL SHAFT SEVEN IRON IS 37 INCHES, GRAPHITE SHAFT IS 37 1/2 INCHES.  SINCE YOU ARE MAKING YOUR OWN CLUBS, YOU GET TO DECIDE THE FINAL SPECS.
Track Page Views With
Auctiva's FREE Counter